Dual Motor Electric Vacuum Suction Cup Lifter 350KG for Tile Stone Glass with LCD Display Auto Re-vacuum Battery K02-05
- Model
- K02-05
Item specifics
- Max Lifting Capacity
- 350 kg
- Suction Cup Size
- 280 × 168 mm
- Material of suction cup
- Nitrile rubber
- Nominal voltage
- 3.7V
- Battery capacity
- 4000mAh
- Charging time
- 2h
- Service time under normal conditions
- 8h
- Charging Port
- Type-C
Review
Description
◢ SPECIFICATION
ART | QTY/INNER BOX | QTY/OUTER BOX |
K02-05 | 1PC | 8PCS |
◢ DESCRIPTION
Dual Motor Electric Vacuum Suction Cup Lifter 350KG for Tile Stone Glass with LCD Display Auto Re-vacuum Battery K02-05
▪ Dual motors, 350 kg holding force.
Two motors work together to evacuate air fast and hold far stronger than any single-motor cup. Move 1200×2400 mm slabs with one hand.
▪ Auto re-vacuum — grips stay locked.
The smart pressure system monitors vacuum continuously. If pressure falls below 300 kg, the pump re-vacuums automatically. The load never quietly loosens while you work.
▪ Live LCD readout.
Battery level and vacuum pressure on screen at all times. You see the grip, not just hope for it.
▪ Removable 4000 mAh battery.
Swaps in seconds and charges over any Type-C cable in about 3 hours — one full charge covers a full working day, even up to 3 days of typical use.
▪ Tap to align, level every time.
A steel tapping plate lets you fine-tune tile position with a tap, and the built-in bubble level keeps every install flat.
▪ 3-layer nitrile rubber pad.
Grips smooth and matte faces alike, resists wear and heat (-20°C to 80°C), and protects polished surfaces.
▪ Safe hoisting.
Reinforced bracket with 4 steel lifting eyes rigs up in seconds for crane and hoist work. Auto power-off after 15 minutes of idle time saves the battery.
◢FAQ
How much can it really lift?
Up to 350 kg on clean, smooth, non-porous surfaces like glazed tiles, glass and polished stone. On textured or porous surfaces holding force drops — always test before lifting critical loads.
Can it lift rough or textured tiles?
The 3-layer nitrile pad grips many matte faces, but 350 kg is rated only on smooth, non-porous surfaces. For porous or curved surfaces, holding force drops sharply — always test first and use a safety sling.
What if the vacuum leaks during work?
The LCD shows pressure live, and below 300 kg the pump re-vacuums automatically — the grip stays locked without you watching it.
How long does the battery last?
The removable 4000 mAh pack runs a full working day on one charge and refills in about 3 hours via Type-C. A spare battery lets you work non-stop.
Can I hang the load from a crane?
Yes — the reinforced bracket has 4 steel lifting eyes. For overhead lifting, always use dual protection with a safety sling.
What customization options are available through the OEM/ODM program?
Our OEM/ODM partnerships offer flexibility to customize branding, adjust product specifications, or even develop unique versions of the suction cup to meet your specific market needs and customer demands.
