Dual Motor Electric Vacuum Suction Cup Lifter 260KG for Tile Stone Glass with 98mm Narrow Pad Auto Re-vacuum Battery K02-04
- Model
- K02-04
Item specifics
- Max Lifting Capacity
- 260 kg
- Suction Cup Size
- 268 × 98 mm
- Material of suction cup
- Nitrile rubber
- Nominal voltage
- 3.7V
- Battery capacity
- 4000mAh
- Motor Configuration
- Dual motor
- Rated power
- 8W
- Charging time
- 3h
- Service time under normal conditions
- 3-4 days
- Charging Port
- Type-C
Review
Description
◢ SPECIFICATION
ART | QTY/INNER BOX | QTY/OUTER BOX |
K02-04 | 1PC | 8PCS |
◢ DESCRIPTION
Dual Motor Electric Vacuum Suction Cup Lifter 260KG for Tile Stone Glass with 98mm Narrow Pad Auto Re-vacuum Battery K02-04
▪ Slim 98 mm pad for strip tiles.
At 268 × 98 mm the pad slips onto narrow strip tiles, sills and thin slabs that a round cup simply overhangs. What used to take two hands now takes one.
▪ Dual motors, 260 kg holding force.
Two motors pull the vacuum down fast and hold far stronger than a single-motor cup. Move long, narrow pieces without asking a second person to steady them.
▪ Auto re-vacuum — the grip stays locked.
Smart pressure monitoring watches the vacuum the whole time and re-pulls it the moment pressure drops. The load never quietly loosens while you work.
▪ Detachable 4,000 mAh battery.
Swaps in seconds and charges over any Type-C cable in about 3 hours. One charge covers 3 to 4 days of typical use, and a spare pack means no downtime.
▪ Tap to align, level every time.
A steel tapping plate lets you nudge tile position with a tap, and the built-in bubble level keeps every install flat.
▪ Grips micro-textured faces too.
The nitrile pad holds smooth tiles, stone and glass as well as lightly textured surfaces with unevenness up to 2 mm - and it leaves polished faces unmarked.
▪ Safe hoisting.
Reinforced bracket with 4 steel lifting eyes rigs up in seconds for crane and hoist work. Auto power-off after 15 minutes of idle time saves the battery.
◢FAQ
How much can it really lift?
Up to 260 kg on clean, dry, smooth, non-porous surfaces like glazed tiles, glass and polished stone. On porous, rough or curved surfaces holding force drops sharply - always test before lifting critical loads.
Why a narrow pad instead of a round cup?
The 98 mm wide pad fits strip tiles, narrow sills and slim slabs that a round cup overhangs. Same body, same 260 kg grip - just a footprint that matches narrow work.
What if the vacuum leaks during work?
Pressure is monitored continuously and the pump re-vacuums automatically when it drops - the grip stays locked without you watching it.
How long does the battery last?
The detachable 4,000 mAh pack covers 3 to 4 days of typical use and refills in about 3 hours via Type-C. A spare battery lets you work non-stop.
Can I hang the load from a crane?
Yes - the reinforced bracket has 4 steel lifting eyes. For overhead lifting, always use dual protection with a safety sling.
What customization options are available through the OEM/ODM program?
Our OEM/ODM partnerships offer flexibility to customize branding, adjust product specifications, or even develop unique versions of the suction cup to meet your specific market needs and customer demands.
